Deck Tape: A Brief Introduction
A deck should last 20 to 30 years. But, in reality, a deck only lasts for around 8 to 10 years. It happens because the timber joists in your deck become weak over time.
Continuous exposure to moisture and outside weather, rot the joists. Eventually, your deck’s life becomes short and you call professionals to repair your deck.
But, if you use waterproofing tape for deck, then you can save the life of your deck. Deck tape is superb adhesive tape and it protects your deck from moisture and outside weather. Therefore, your deck lasts year after year fighting all kinds of weather. So, use deck tape and keep your deck healthy for decades.
Where Should You Use Deck Tape?
1) At the End of The Noggins
Noggins are exposed to moisture. But, when building decks, people don’t take care of them. As a result, the timber begins to rot from the noggins. Using the deck tape, you can seal the end of the noggins. Moisture wouldn’t reach the end and the wooden piece would stay strong.
2) On The Top Of The Joists
Whenever rain or snow falls, the joists on your deck absorb it. This moisture starts the rotting of the joists from the inside. But, if you use deck tape, then you can repel this moisture. Deck tape sits tightly on the joists and no moisture can enter them. Thus, the joists last long for years.
3) On The Edges or Cut Ends Of The Deck Board
The deck boards are usually strong. But, the open edges of the boards must have protection. So, wrap a deck tape around the edges of the boards and keep them protected.
Apart from that, the cut ends of the deck boards are more prone to absorb water and moisture. Deck tapes can completely seal these cut ends, In this way, your deck protects itself from all kinds of moisture.
4) On The Posts
Timber posts that support your desks or fences might have a connection to the ground. Deck tapes on these posts can enable them to avoid moisture. As a result, all the timber posts keep their robust structure healthy even after many years.
5) Around The Fasteners
When fasteners go into the timber joists, they create an exposure around them. Rainwater finds a way into the woods through these fasteners. Using deck tapes around them can seal the base of the fasteners. Thus, your deck gets complete protection from corrosion and rotting.
Why Should You Choose Walther Strong Deck Tape?
1) Extremely Durable
Durability is perhaps the most important thing in a protection tape. Walther deck tape for joists is made of non-butyl materials. This means the tape can withstand extremely high (93 degrees C) and low (- 40 degrees C) temperatures. Moreover, UV rays can’t ruin these tapes’ overall integrity. Hence, the tape can protect your timber posts and joists for decades.
2) Super Strong Adhesive
Poor adhesive quality makes a deck tape weak. That’s why Walter Strong has made their deck tapes using a strong adhesive. The adhesive can embrace any wooden surface closely. Furthermore, after 72 hours, this tape creates an impenetrable layer on the wood’s surface. Thus, you can rely on this tape without any hesitation.
3) Available In Different Sizes
Your deck posts or joists may have different sizes. As a result, you need deck tapes of various widths. You can have 50 mm, 100 mm, 300 mm, and more sizes at a Walther Strong store. All of these tapes come with extra width. So, you wouldn’t need to find extra tapes to seal the edges. The tapes have self-seal methods. Therefore, the tapes work like a cap rather than a wrapper.
4) Easy To Use
Some deck tapes have a messy-type stickiness in them. It becomes really difficult to work with such tapes. But, this Walther Strong deck tape has a non-sticky application.
Apart from that, screws are often used through these tapes. In that case, if you remove the screws, you will find no tape residues on the screws.
You can tear the tape easily and the tape won’t stick to the adhesive part. Hence, it’s an ideal deck tape for your deck timbers, posts, and joists.
5) Repels Water Perfectly
The best feature of this deck tape is that it can protect your deck structure from moisture. The tightness of this tape is just incredibly strong. If your deck is exposed to water or rain, then this tape can protect it perfectly. It can repel water and it never allows any moisture to rot your wooden deck structure. For this reason, it’s an ideal tape for your deck.
6) Repositionable
The adhesive on this tape is of superior quality. So, you can reposition it without any difficulty. Sometimes you may install the tape wrongly. In that case, you may have to remove it completely from the surface. However, this Walther Strong deck joist flashing tape can be removed cleanly from a surface and you can use it again. Thus, you may not have to waste the tape.
7) Multiple Usages
This deck tape can be used on multiple surfaces and edges. When your deck is constructed, it can have many sections. Noggins, joists, boards, and posts are some of the common parts of a wooden deck structure. You can use this waterproofing tape for deck on these sections. The tape can protect all these exposed sections of your deck. You can also use this tape around the fasteners. So, it’s a helpful tape for your deck.
Many people ignore the trex protect deck tapes and their decks don’t last for many years. A wooden deck has several vulnerable sections and paint can’t protect all of these sections. Hence, you need strong and durable deck tape to protect your deck.
This waterproofing tape for deck from Walther Strong has an incredibly strong adhesive on it. It can protect your deck structure from moisture and your deck will stay healthy for decades. Just use this deck tape and you may not have to repair your deck again and again. So, don’t forget to use Walther Strong deck tape.
You can visit their official site to know more about it – www.waltherstrong.com