Introduction
Disabled ramps for houses refer to ramps that are installed in the place of a door or staircase, which allow the disabled to pass through easily and enter a house. They are becoming increasingly popular as they offer accessibility, security, and convenience while also going beyond their original purpose of providing assistance to the disabled. Disabled ramps for houses can be made out of wood or steel. They typically cost around $2,500 -3,000 and come complete with an installer’s manual that is written with step-by-step directions on how to install them successfully.
Why you need disabled ramps for houses
- For disabled people and their children to walk through a door
A door might be the easiest way to enter a house, but with all sorts of obstacles such as stairs and uneven flooring, this is not so easy for people with disabilities. With a disabled ramp for houses, they are able to walk through a door without worrying about flooring or stairs.
- To provide accessibility and security
Apart from providing accessibility, disabled ramps for houses also provide security, as they serve as a barrier between the road and the house. This makes it harder for someone to break into someone’s house while they are in it, as they would have to climb a lot before they can reach the house.
- For older people who have difficulty walking up stairs
Stairs are hard on older people who have difficulties with their ankles or knees, but using a wheelchair make their lives much easier. With a ramp, they can easily roll up and down instead of having to do a lot of walking.
Ways to install disabled ramps for houses
- Calculate the length of the ramp you will need
The first step when installing a disabled ramp for houses is to measure the area of land where the ramp will be installed and calculate how long it will take to complete. You need to make sure that there is enough land so that it will not have an adverse effect on your yard or garden.
- Look for a location that can serve as a construction site
You need to choose an area where you can build your ramp so that it will not have an impact on your yard, garden or the rest of your house. There are ramps made out of wooden planks, which can be easily installed inside the house. The other type of ramp which is mostly manufactured out of steel, is usually placed outside and needs a large space for installation, such as in front of the garage.
- Get your hands on the design
Once you have chosen the area, look for a design that you like and download it on a computer so you can add modifications to it, and print it out.
- Calculate the number of planks needed to complete the project
You need to figure out how many planks are needed for making each of the sides of your ramp. By calculating this accurately, you will be able to save yourself time and money in the long run.
- Get the planks ready for installation
Purchase the planks that you need to complete your project and put them in order for installation. The first side or plank needs to be attached to the ground so that it can support the weight of a person who is walking up/down the ramp.
- Make sure that all of your measurements are correct before you start installing
After connecting the first side of wood, make sure all of your measurements are correct so that you do not have any problems with installing it later on.
- Install the ramp
Once you are sure all of your measurements are correct, you can start installing the ramp. It takes some time to install a ramp from ground to top, so make sure you have enough time and tools.
Conclusion
Disabled ramps for houses are becoming more and more popular as they provide accessibility, security and convenience to the disabled. They are made out of wood or steel, and can be installed anywhere in the house or garden.